FIRMWARE


How to update the latest firmware and speed cam data

  1. Download the latest firmware by selecting the appropriate geographic region where the dash cam is used http://thinkware.com.sg/downloads.(eg. x500_1.00.23_us.zip)
  2. Unzip the downloaded file into the root directory of your MicroSD Card.[SD_ROOT]:/X500_pkg.bin[SD_ROOT]:/MicomFirmware.hex[SD_ROOT]:/Setting/default.cfg[SD_ROOT]:/X500_Setting.exe
  3. Download the latest speed / red light camera data in accordance to the geographic region http://www.thinkware.com/Support/Download.(smartguidepoint.dx2)
  4. Copy the downloaded smartguidepoint.dx2 file into the driveinfo folder. (If ‘driveinfo’ folder doesn’t exist in the root directory of your MicroSD Card, please create one.)[SD_ROOT]:/driveinfo/smartguidepoint.dx2
  5. Insert the MircoSD Card into the dash cam unit.
  6. The device will start upgrading once the voice notification The upgrade will now start is played.
  7. When complete, the dash cam will operate with the latest firmware.

IF firmware upgrade is continued for more than 5 minutes or downloading failed as like image below, it means that firmware file is corrupt.

In that’s the case, please delete the downloaded .bin, .rom or .pkg file and re-download the firmware file into MicroSD Card.

And please proceed to the upgrade from 2nd step again.

 

How to upgrade the latest speed cam data

1. Download the latest speed / red light camera data in accordance to the geographic region http://thinkware.com.sg/downloads/.
(smartguidepoint.dx2)

2. Copy the downloaded smartguidepoint.dx2 file into the ‘driveinfo’ folder. (If ‘driveinfo’ folder doesn’t exist in the root directory of your MicroSD Card, please create one.)
[SD_ROOT]:/driveinfo/smartguidepoint.dx2

3. Insert the MircoSD Card into the dash cam unit.

4. The device will start recording and operate with the latest speed camera data.