THINKWARE DASH CAM X330

HIGH DEFINITION VIDEO QUALITY

CMOS Image Sensors allow constant Full 1080p HD resolution recording during both daytime and nighttime along with a 140-degree wide angle lens view. This will minimize blind spots to assure recording of all events without fail.

2.7 INCH CLEAR DISPLAY

With the vivid 2.7-inch LCD display, there is no need to connect your memory card to an external device to review your recordings. You can use the display to either watch the current view in real time, review videos of recorded events, or to change various settings.

FORMAT FREE TECHNOLOGY

The X330 utilizes the TAT (Time Allocation Table) save system instead of the FAT (File Allocation Table) system. This allows THINKWARE’s proprietary Format Free Technology to eliminate the need for periodical manual formatting of recorded video files on the microSD memory card. It also helps extend the life of your memory card. You can view recorded video files on any PC or smartphone without having to worry about converting files. THINKWARE DASH CAM X330 saves the hassle of manually clearing memory space.

SAFETY CAMERA ALERT

An Exclusive safety feature on the THINKWARE DASH CAM - The Safety Camera Alert allows THINKWARE DASH CAM to be on continuous alert for red lights and locations of traffic cameras on your driving routes while recording high quality videos of driving activities at the same time. THINKWARE DASH CAM provides active warnings for these 5 types of traffic safety enforcements.

RED LIGHT

WARNING SYSTEM

SPEED CAMERA

WARNING SYSTEM

RED LIGHT & SPEED CAMERA

WARNING SYSTEM

AVERAGE SPEED

WARNING SYSTEM

MOBILE ZONE

WARNING SYSTEM

RED LIGHT / SPEED CAMERA / RED LIGHT & SPEED CAMERA

Voice guidance along with visual alerts on the dash cam screen will alert drivers of any approaching traffic enforcement cameras along the route. Cultivate safe driving habits with the THINKWARE DASH CAM.

* The Safety Camera Alert feature is available only when using the GPS Tracker accessory sold separately.

VARIOUS AUTONOMOUS RECORDING MODES

THINKWARE DASH CAM X550 supports various recording modes depending on the status of the vehicle whether it is in motion or parked (continuous recording, incident recording and motion detection recording).
Using the hard wiring power cable, which is directly connected to the power system of vehicle, you can automatically switch between continuous recording mode and parking mode without turning the power on/off.

Continuous Recording Mode

This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.

Incident Recording

The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.

Manual Recording Mode

Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.

VIEWER FOR CHECKING CLEAR AND PRECISE VIDEO

The intuitive and simple-to-use interface of THINKWARE DASH CAM allows you an easy and convenient viewing of your recorded videos. Through PC or Mac viewer, you can playback and download recorded videos along with your route history and speed record. You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.

COMPREHENSIVE DRIVING INFORMATION WITH GPS

With the optional GPS Tracker, the THINKWARE DASH CAM X330 / X350 can record the vehicle's driving speed and provide its precise location and routes identification on the map. The GPS Tracker helps you to accurately assess the details of the surrounding area by providing you with the vehicle speed and the time of a collision, and the severity of impact. The video recording feature not only stores driving footages in case of an event, but it can also be used to track your holiday travel routes.

* The video recording feature is only available when using the GPS Tracker accessory sold separately.

EASY INSTALLATION AND USAGE

Anyone can activate and control the THINKWARE Dash Cam X330 easily with a few simple buttons and cable connection ports.
Even if you are a first time user, you will not face any problem with installation and understanding the controls.

EASY MOUNTING SYSTEM

THINKWARE DASH CAM is easy to install. You can simply mount it to the windshield with 3M Adhesive Mount and connect its cable to the power outlet of your car.

HIGH-TEMPERATURE PROTECTION SYSTEM

Specially designed heat discharge construction and a built-in thermal sensor of X330 / X350 protect the device and its data against intense heat by automatically turning it off to prevent overheating.

FAIL-SAFE RECORDING

In the event that the power gets disconnected after an accident, fail-safe recording uses the Super Capacitor for backup power to ensure safe storage of any recording in progress – so you can be assured that your valuable data will be securely stored under any circumstances.

PRODUCT SPECIFICATIONS

GENERAL SPECIFICATIONS

Dimension	97 x 26.15 x 51.8 mm / 3.81 x 2.02 x 1.04 inches
Weight	94g (0.2 lbs)
Package Contents	Main Dash Cam Unit, Mount with 3M tape (1ea), Cigar Jack Adaptor, Adhesive Cable Holder, MicroSD memory card with adapter(consumable), Quick Start Guide/Warranty Card

DETAILED SPECIFICATIONS

Camera	Sony Exmor CMOS 2.12M
Display Panel	2.7" LCD Viewfinder
Resolution	1080p Full HD (1920 x 1080)
Capacity	Micro SD Card 8GB(class 10), 16GB/32GB/64GB(UHS-I)
Recording Modes	Continuous Recording, Incident Recording, Manual Recording, Audio Recording, Parking Surveillance Recording
Sensor	3-Axis Accelerometer G-Sensor (3D, ±3G)
GPS	External GPS Antenna (Optional)
Power	Input Power: DC 12/24V (MAX 35V)
ETC	Security LED